Replacing garage roof with felt

· 8 min read · 1,444 words
Replacing garage roof with felt

Replacing a garage roof with felt can renew a worn covering, but it won’t usually solve ponding water on its own. Ponding is commonly linked to poor roof falls or drainage, so a replacement should include checks of the outlets and any improvements needed to help water drain away. Simply laying new felt over the problem can leave the cause untouched.

If you’re weighing up repairs or a full replacement, it’s sensible to want a clear answer before work begins. This guide explains when new felt may be suitable, what to look for on the roof deck and around edges and drainage, and how felt compares with EPDM and GRP. You’ll also learn what modern felt systems can offer and which details matter for a durable finish, helping you make a more confident decision about your garage roof.

Key Takeaways

  • New felt alone won’t usually stop ponding; the roof’s falls, outlets and drainage need attention too.
  • Blisters and widespread cracks can point to different problems, so look at the condition of the whole roof before deciding between a repair and replacement.
  • Compare felt, EPDM and GRP by considering the roof’s condition, the finish you want and the installation involved.
  • Modern felt roofing uses layered systems; learn which preparation and detailing help protect the deck, edges and wall junctions.

Does replacing felt fix ponding water?

Replacing a garage roof with felt renews the waterproof covering, but it won’t fix a roof that holds water. Ponding usually points to poor falls or a drainage problem. If water remains after rain, inspect the outlets, gutters and roof surface. Laying a new covering over unresolved drainage problems leaves the cause in place.

Blisters are raised bubbles in the felt. They can form when layers separate or air or moisture becomes trapped beneath the covering. A blister isn’t the same as ponding, but both deserve attention. Don’t puncture a bubble: a hole can let water through. Look for nearby cracks, splits or damp patches inside the garage to help judge whether the damage is local or widespread.

Choose repair or replacement by assessing the whole roof:

  • A single damaged area, with sound felt elsewhere, can suit a local repair.
  • Brittle or cracked felt across the roof, or leaks in several places, points towards replacement.
  • Check the deck and timbers for soft or rotten boards before fitting new felt.
  • Clear and inspect outlets and gutters, then consider drainage improvements where water collects.

A thorough replacement includes preparing the deck and detailing the corners, edges and outlets. The wall junction needs particular care on an attached garage, where the roof meets the house. These details help keep water out, but the roof still needs a route for water to drain away. Replacing felt without addressing poor falls won’t solve the cause of ponding.

After rain, note where water gathers and whether it sits near an outlet or wall. This simple observation helps identify which parts of the roof need attention before work starts.

Replacing a garage roof with felt should include preparing the roof deck, detailing corners and edges, making wall junctions watertight, and ensuring drainage through the outlets and gutters works properly. These are essential parts of the replacement, not optional finishing touches.

Felt versus EPDM and GRP

Felt, EPDM and GRP are different flat-roof coverings. Felt uses bitumen-based layers, while EPDM is a synthetic rubber membrane. GRP is glass-reinforced polyester applied as a laminate. The right comparison involves more than the material: consider the roof deck, edges, outlets and the finish you prefer.

Felt is a familiar layered covering, with joints and edges that need careful detailing. EPDM comes as a flexible sheet, so the layout and fixing method matter around roof edges and penetrations. GRP forms a hard, fibreglass-reinforced surface over the deck, and its finish depends on careful preparation and application. Every system needs suitable detailing where the roof meets walls or gutters.

For example, a small garage with a simple shape may suit a straightforward covering. A roof with several outlets, awkward corners or adjoining walls needs close attention to junctions, whatever the material. Compare the full installation approach, not just the visible surface.

  • Felt: layered bituminous covering, with joints and edges as key details.
  • EPDM: flexible rubber membrane, with sheet layout and perimeter fixing to consider.
  • GRP: reinforced laminate, formed over the deck and finished as a hard surface.

Ask how the chosen system will meet the roof’s edges, outlets and wall junctions. Those details affect how the covering works as a complete roof. If you’re comparing options for your garage, a flat roof assessment can help relate the material choice to the roof’s shape and condition.

Replacing garage roof with felt

Modern felt roofing systems

Modern felt roofing uses bitumen-based layers to create a weatherproof covering. Each layer contributes to the finished roof, so sound preparation and careful fitting matter. Work starts with a clean, stable deck. Loose material or damaged boards, for example, need attention before new felt is laid. Corners, edges and roof openings also need neat, secure detailing.

The roof’s layout helps determine the installation details. An outlet near a corner needs careful finishing around its opening. A garage joined to a house needs a well-detailed roof-to-wall junction. A flat, unobstructed deck presents different challenges from one with several edges or fittings. These practical details shape how the felt system is prepared and installed.

  • Deck: inspect the surface and address damaged boards before covering it.
  • Layers: fit the felt system evenly across the prepared roof.
  • Edges: finish perimeter details to protect exposed roof boundaries.
  • Junctions: detail outlets and wall connections to keep the covering continuous.

Old felt must be removed and handled as part of the job. According to the UK Government, the roofing contractor will remove waste building material or put it in a skip for removal from the site. Include waste removal in the work plan so old material doesn’t remain on your property.

Before work starts, note where the roof meets walls, gutters and outlets. These details help explain the preparation and finishing your garage needs. A clear scope should cover the deck, felt layers, edges, junctions and removal of old roofing, making it easier to understand what the installation involves.

Discuss felt roofing for your garage

I R. Wilson Roofing: Flat Roof Repairs

I R. Wilson Roofing carries out flat roof repairs and felt roofing for garage roofs. If the covering has isolated damage, repairs may be suitable; widespread cracking or repeated leaks can point towards replacement. The roof deck, edges and drainage also affect the work needed, so describe what you’ve noticed, such as a blister, damp patch or water gathering after rain.

Fascias, soffits and gutters also matter to the roofline. Gutter cleaning helps keep water moving through the drainage system, while a sound roof covering protects the garage below. I R. Wilson Roofing provides these services alongside flat roof repairs and felt roofing.

For help with your garage roof, contact I R. Wilson Roofing through the roofing website.

Choose the next step for your garage roof

Before arranging work, note what you’ve noticed: where water gathers, whether the felt is blistered and whether you’ve found damp inside. These details help frame a useful conversation about repair or replacement. The right decision should address the roof’s underlying condition, not just cover visible wear.

I R. Wilson Roofing provides Flat Roof Repairs and Felt Roofs, as well as Fascias and Soffits. If the roof is leaking, the felt is failing or the roofline needs attention, these services can help you plan the right work for your property. Replacing a garage roof with felt is one option to consider alongside the roof’s condition and drainage needs.

Arrange your free consultation with I R. Wilson Roofing

A clear next step can make roof maintenance feel more manageable. Share what you’ve noticed about your garage roof with I R. Wilson Roofing to discuss the work it may need.

Frequently Asked Questions

Why does felt bubble or blister?

Felt blisters when it lifts from the surface beneath, leaving a raised pocket. Blisters may appear in isolated spots or across a wider area. Check whether nearby felt is also cracked, brittle or lifting, and note any water marks inside the garage. These observations help distinguish a small area of damage from a covering that may need broader attention.

Ian Wilson

Article by

Ian Wilson

“With 30 years of experience in Norwich, IR Wilson Roofing provides dependable roofing repairs and replacements. We take pride in doing the job right the first time and keeping customers informed every step of the way.”

More Articles